Eye nebulizer handheld househeld Eye moistening instrument

Name: Eye nebulizer handheld househeld Eye moistening instrument
Brand: Mericonn Medical
SKU: UN203
Availability: InStock
Rating: 5 (1 reviews)

Item No.: UN203

This device utilizers the latest microporous ultrasonic atomizing technology, full-powered steam in few seconds, the device converts into ultrafine particles and has a large penetration area. It is more uniform, with better absorption, easy to use. It is

INQUIRY

PDF Format

Description

The following conditions：

Astringent Eyes
Dry Eyes
Eye Fatigue
Eye Protection
Other eye problems, please use under the doctor's advice

Function

Three working modes：High, Medium, Low, choose the mode by pressing the power button.

The LED indicator light turns yellow when the device is charging, green when it is done charging, green/yellow alternately when the device is in automatic cleaning mode.
Press the power button for 5 seconds to start automatic cleaning.
The device will automatically shut off after the use of 20 minutes.
The device comes with a lithium battery built into the unit.

Specifications
Mains connection：100-240V，50-60Hz，0.15A
Input：5V/1A
Atomized particles：≤5 μm
Flow rate：approx.0.2ml/min
Noise：≤50dB(A)
Volume：max.10ml
Product weight：100g+5%(not including accessories)
Dimensions：118mm(height)， 39.5mm(diameter)
Housing material：ABS
Operating temperature conditions: +5°C~+40°C
Operating relative humidity：15%~93%
Operating storage conditions: -10°C~+45°C

How to Use
1.Open the container lid, and fill the container with eye nutrition solution, DO NOT overfill, The maximum recommended fill amount is 10ml, then close the container lid.
2. Attach other parts like the eye mask to the device based on your need.
Use eye mask：place the device on your one eye.
3.Press on the power button to choose your needed working mode. NOTE: each mode will take different time to atomize all the liquid, for example:
5ml eye nutrition solution
Three working modes
High Mode : take about 15 minutes
Medium Mode: take about 20 minutes
Low Mode : take about 30 minutes
4. Press the power button to start the device.
5.The Micronet Sprayer Eye Moisturizeris on green light which shows that it is working perfectly.
6.Press the power button again if the device turn off automatically after using 20 minutes.

CAUTION:
*Please use eye nutrient solution liquid in this device, DO NOT use purified water, oil, milk, or thick liquid.The atomization volume varies with the concentration of the liquid.
* Make sure to clean the mesh plate after each use to avoid blockage, DO NOT touch the mesh with your hand, brushes or any hard objects.
* DO NOT submerge the Micronet Sprayer Eye Moisturizer in any liquid, make sure it fully dries if any liquid spilled on or inside the device
before using.
* DO NOT place the device on heated surface.
* DO NOT turn on the device without liquid in the container cup.